Note:
Make sure the switch is correctly in the “ON” position, check by covering the solar panel with your hands,see if light turns on automatically .
1.Install the solar product correctly where it can get direct sunlight.
2.Leave the switch to “ON” position.
3.Select an outdoor location which AWAY FROM OTHER LIGHT SOURCES AT NIGHT, such as street lights.Or It may not turn on automatically at night. The light sensor is very sensitive and make sure the solar panel is not expose in light.
4.Duration of light depends on solar product’s level of sunlight exposure, geographical locations, weather conditions and the length of daytime.
Specifications:
Switch: ON/OFF (Under the panel)
Charging time: 6-8 hour in direct sunlight environment
Working time: 6-8h if fully charged
Material: plastic
MAINTENANCE AND TROUBLESHOOTING:
Make sure the switch is set to “ON” position.
Keep the solar panel clean.
If solar product does not light up after a long time use, replace the rechargeable batteries as they may be weak or worn out. (Battery 1 pc “AA” 1.2v, Ni-CD, Rechargeable- Same equivalent type as recommended must be used).
Package included:
1 x Solar Powered Wind Spinner Hanging Light
1 x Spare battery
1 x User Manual
1 x Spinning Hanging Hook